In a nutshell, ‘Green Energy’ utilises natural resources such as sunlight, wind, tides and geothermal heat to provide our daily energy requirement. They’re all considered naturally able to replenish – and thereby ‘Green’. It is easy to think that we may be travelling back in time when we think of items such as wind power and windmills. Generally, this is the result of using up to date ideas, specifically those that are planet friendly and eco-efficient.
It is the use of simple renewable energies such as Solar Thermal and Solar Water Heating Collectors, that suits the home environment. It is equipment such as Photovoltaic Panels (PV’s) that develop electricity through suitable roof-panels. Equally important is that of Biomass Energy – which includes Stoves, Fuel, Pellets and Boilers burning Wood. Then we have the ancient energy of the Sun and the heat that comes from it – now called Ground Source Heat Pumps. Considering items such as Wind Power and Hydro Turbines, we are finally getting to very old forms of energy production.
Solar Thermal Energy – By using different technologies, Solar Energy is effectively made up of two types of solar panels. As a first strategy, we have Solar Water Heating Collectors – which basically creates hot water from solar energy. Added to this is the generation of electricity from solar radiation – known as Photovoltaism, or more commonly Solar Electrical panels. To get the best results these panels need to be south facing at an angle of around 30 degrees from horizontal, and away from blockages.
As a result, Solar Water Power is often considered the most common form of Solar Energy in the UK. Solar Water heating systems can meet the need for more than half of all hot water needs in the domestic market. The average cost of installing this type of equipment is expected to range from 500 to 1500 pounds for a DIY system, through to 2-5k for a professionally installed system.
Biomass Energy and ‘Energy Crops’ – This is a ‘capture all’ phrase which includes all natural materials. e.g. Wood, straw and poultry litter – but nowadays also includes modern ‘Energy Crops’. It’s the ability of this power source to generate diverse forms of energy, such as heat and electricity, that makes this so adaptable. Indeed, within the European Markets, the UK has some of the leading levels of Biomass material at hand. It is the minimal C02 produced, alongside the actual energy production, that makes this attractive to the markets. As each tree felled, it is replaced by another. This helps to reduce the overall effect on C02.
By the growth of Short Rotation Crops (SRC), the UK is able to maximise the ‘Energy Crops’ return overall. Perennial grasses are also responsible for large quantities of dry matter. Municipal and Agricultural waste products are both little known, but essential materials to this field. Under normal agricultural activity, agricultural waste is a natural by-product. Whereas Municipal Waste is derived from wood or food – and can be used for biomass energy.
Geo-Thermal Energy Technology: Used in the generation of both warm water and electricity, this energy mainly comes from the Sun and heats the Earth. Using the ground temperature of around 12 degrees in the UK – we can both heat and cool buildings. Although heat pumps require energy to function, their rate of return is superb – being a four-fold benefit over the energy put in. Heat source pump energy can go one step further (by gaining a 100 percent return) if the energy to power them comes from items such as wind turbines or solar electrical panels.
Wind Energy Systems: Wind Energy as a sustainable source of energy has been going on for millennia. However, in more recent times there’s been the option to recover the energy for its own sake – and deliver this either to a home unit or to the local power grid. The ability to utilise wind generation is considered to be greatest in the UK. Potentially, we can produce 10 percent of our annual energy needs through wind power, although at present within the UK we still only use 1 percent. Electricity can be produced from as little as 2p per kWh, but generally comes in somewhere between 2-10p per kWh. Recovery of the cost involved is somewhere between 6-9 months.
Lastly, we have a discipline that the UK does well – namely Hydropower. Energy creation from moving water is very old – although it is now being done in new ways. It is this type of energy production that could meet 2 percent of all the UK’s demand.
Using a turbine, a Hydropower system can transform the energy of water into other forms. The important thing is that, without having to rely on water storage, the turbines can generate electricity. ‘Micro-Hydro’ however, uses the dam and sluice systems that have been made redundant by the larger national distributions. Although a lesser known form of electricity output, this process could supply 200mW of UK demand. Installing systems like this could cost between 200 pounds and 3k per kW of energy created.
It is the growing worldwide energy requirement that is causing the growth in ‘Green Energy’. The UK remains one of the main beneficiaries of this technology.
It is the drive for installations in the domestic sector that looks to favour jobs such as plumbers and electricians. It is the political view of this type of energy generation that results in grants and financial aid becoming ever-more prevalent. It is important to gain the correct qualifications to install these items. You could consider either plumbing or electrical training programs that highlight green installation.
Copyright Scott Edwards. Check out www.electricaltrainingcoursesgb.co.uk/SolarEnergyCourses.html or Solar Energy Training.
